Design Desk · Corona, CA · Mon–Fri 8:30 AM – 5:00 PM PT [email protected] +1 (951) 735-9220

Why I Ignore Lighting Unit Prices Now (And What Changed My Mind)

The lowest unit price on a lighting quote is almost never the cheapest option for a commercial building.

I know that sounds backward—especially when you're staring at a spreadsheet with three bids and one number is clearly smaller than the others. But after four years managing lighting procurement for a 400-person company across three facilities, I've learned the hard way that sticker price is the least reliable number in the entire transaction.

Here's what I mean.

The Huge Chandelier That Blew My First Budget

Two years ago, we replaced the huge chandelier in our main lobby. It's a statement piece—the kind of chandelier lighting you can't miss when you walk through the front door. I got three quotes. If I remember correctly, the lowest one came in around $8,200 for the fixture itself. The "expensive" one was $11,500.

I went with the $8,200 quote. It felt like responsible stewardship of company money.

Then the bills started arriving:

  • The fixture didn't include a dimming module compatible with our existing system. Add $1,400.
  • The mounting hardware was rated for 40 pounds. Our lobby ceiling required a custom drop for a 90-pound fixture. Add $650 in extra rigging.
  • The lead time meant two extra weeks of renting a scissor lift we thought we'd use for a day. Add $380.
  • When the fixture arrived, two of the six crystal sections had shipping damage. Replacement took three weeks. Meanwhile, the lobby had half a chandelier for most of a month.

Total: roughly $10,600. And that doesn't count the time I spent coordinating returns, rescheduling the install crew, and explaining to our VP of operations why the lobby looked unfinished for a month.

The $11,500 quote would have been cheaper.

What Replacement Parts Taught Me About Vendor Discipline

We use Acuity Brands fixtures across most of our buildings. When it comes to acuity brands lighting replacement parts, I've learned there are two kinds of procurement people: those who buy the cheapest compatible part they can find, and those who pay the premium for OEM.

I was in the first camp. Why pay $180 for an OEM driver when a $60 aftermarket part fits the same socket?

Because it didn't fit the same socket. Not exactly. And when it failed—four months later, instead of the three years I expected—the labor to swap it out cost more than the savings on three parts. Multiply that across 40 fixtures in one building, and the "budget" approach is hemorrhaging money through maintenance tickets.

Now I keep a small stock of OEM replacement parts on hand. It's not cheap upfront. But our facilities team stopped making emergency calls for failed drivers after 10 PM.

The Control System That Paid for Itself

This one surprised me.

When we upgraded to DTL Acuity Brands dark-to-light photocontrols in two of our buildings, I almost rejected the quote. The controls added roughly 18% to the project cost. My manager asked me to justify the premium, and all I could say at the time was "better dimming."

What I didn't expect: the photocontrols cut our exterior lighting run-time significantly. Not because they're magic—because they actually respond to ambient light instead of a fixed schedule. When daylight saving time shifted, nobody had to adjust the timer. When a storm rolled through at 3 PM, the lights didn't kick on automatically for the next four hours because the sensor knew better.

I'm not going to throw out a savings percentage here. I don't have a year of clean data yet, and I won't make that claim until I do. What I can tell you: the maintenance calls for "lights are on during the day again" dropped to zero. And the last time I checked, a service call costs more than a photocontrol module.

The Track Lighting Question Nobody Asks Up Front

When we installed track lighting in our executive conference room, the design team asked: what's the best track lighting for art? We have two large prints on the back wall, and the wrong light will fade them faster than anything else in the room.

Our first instinct: find track heads with adjustable warmth and decent CRI. The cheapest option? Standard halogen cans. Great color rendering. Cheap to buy. Terrible for art—too much UV, too much heat, and they eat through energy.

We went with LED track heads rated at CRI 90+ with a specific color temperature between 3000K and 3500K. They cost about 2.5x the halogen option. The prints haven't changed color in 18 months. With halogens, we'd be looking at noticeable fading by now.

Could I prove that with a spreadsheet? Not exactly. But the replacement cost of those prints is $2,800 each. I'll take the math that protects them over the math that saves $40 per fixture.

"Isn't This Just Common Sense?"

That's the pushback I usually hear. And yes, on some level, everyone knows that hidden costs exist. But knowing something and actually building it into your comparison process are two different things.

It's tempting to think you can just compare unit prices and pick the winner. But the "always take the lowest bid" instinct isn't stupid—it's how most procurement departments are measured. If you're judged on unit price, you optimize for unit price. That's a system problem, not a people problem.

Here's what changed for me: I started building a simple TCO sheet before I even look at the numbers. It has line items for installation, power, maintenance, replacement parts, and the time I'll spend managing the project. It takes 20 minutes to set up for a new category. Once it's there, I just plug in quotes and the comparison becomes much harder to fudge.

The Bottom Line

I'm not saying the most expensive option is always the right call. That's just as lazy as always picking the cheapest.

What I am saying is this: if you're comparing lighting quotes on unit price alone, you're not making a procurement decision. You're making a guess.

The fixtures that are still running three years later—that's the number that matters. Not the one on the quote.

Prices and product references in this article reflect my experience through Q4 2024. Lighting prices and tariff structures change fast, so verify current rates before you build a budget. I don't work for Acuity Brands—I buy their products and have opinions about them.